TORAYCON® PBT Resin

Technical Information | Secondary processing

Secondary processing

Ⅰ. Machining

  1. Boring holes
    Bore holes using a standard metal-boring drill. Turn the drill at 600-3000 rpm for a 4-6 mm hole or 1,000-1,500 rpm for an 8-13 mm hole. Cool appropriately to avoid heat build-up.
  2. Cutting and lathe-turning
    A lathe-turning machine for metal applications can easily lathe our resin. Whether using high-speed steel or ultra-hard steel—either turning tool will work on TORAYCON®. The shape of the turning tool should have a side rake or a rake angle of 3° or less to reduce heat build-up and provide a sufficient escape for shavings.
    A lathe turning speed of 30-100 m/min is generally suitable.
  3. Sawing
    A saw with coarse teeth and a large pitch between teeth is most suitable. For circular saws, 1-2 teeth/cm and a speed of 0.5-1 m/min is appropriate. Cool the portion to be cut or take other measures as appropriate to prevent heat build-up.
  4. Filing, grinding and buffing
    A file, grinder or buffer may also be used on TORAYCON®. Be careful to avoid heat build-up caused by friction.

Ⅱ. Adhesion

Ultrasonic welding, spin-welding or an adhesive can be used to adhere TORAYCON®.
Ultrasonic welding is simple and the preferred adhesive technique. TORAYCON® is crystalline, has a high melting point and solidifies quickly, so use special techniques on the joining surface or horn to achieve higher adhesive strength.
Epoxy or cyanoacrylate adhesives are suitable when bonding PBT to PBT or PBT to another resin.