A biaxially oriented polypropylene film with matte finish on one side.
1)With a highly matte tone, a subdued, sophisticated surface appearance can be achieved.
2)Both sides of the film are excellent in mold release property.
20,25µm
| Properties | Unit | Direction /Side |
Typical Data | Measurement method |
|---|---|---|---|---|
| Tensile Strength | MPa | MD | 100 | JIS Z1712 |
| TD | 230 | |||
| Elongation at Break | % | MD | 200 | JIS Z1712 |
| TD | 60 | |||
| Young's Modulus | GPa | MD | 1.47 | ASTM D882-64T |
| TD | 2.75 | |||
| Thermal Shrinkage (140°C 15min) |
% | MD | 8.0 | JIS Z1712 |
| TD | 3.5 | |||
| Haze | % | - | 70 | JIS Z1712 |
| Light Transmittance | % | - | 88 | JIS K6714 |
| Gloss(60°- 60°) | % | outer side | 10 | JIS K8741 |
| Coefficient of Friction(µs/µd) | - | inner side/ inner side |
0.25/0.20 | Toray Method |
| outer side/ outer side |
0.40/0.30 | |||
| Surface Wetting Tension | mN/m | inner side | 38 | JIS Z1712 |
| outer side | 32 | |||
| Surface Resistivity | LogΩ • cm | inner side | 13 | Toray Method |
| outer side | 18 |
*Atomospheric Condition 25°C65%RH
Matte type for mold release, Packaging
- Attention
- 1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
- 2. Refer to our MSDS (Material Safety Data Sheet) before use.
- 3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
