A biaxially oriented polypropylene film excelling in transparency and surface gloss.
1)Excellent in transparency
2)Excellent in mold release
25,30,40,50,60µm
| Properties | Unit | Direction /Side |
Typical Data | Measurement method |
|---|---|---|---|---|
| Specific Gravity | 0.91 | JIS K6758 | ||
| Melting Point | °C | 165 | ||
| Tensile Strength | MPa | MD | 150 | JIS Z1712 |
| TD | 300 | |||
| Elongation at Break | % | MD | 200 | JIS Z1712 |
| TD | 50 | |||
| Young's Modulus | GPa | MD | 1.8 | ASTM D882-64T |
| TD | 3.3 | |||
| Falling Ball Impact Strength | J/mm | 67 | JIS K6717 | |
| Tear Propagating Strength | mN/m | MD | 2450 | JIS Z1702 |
| mN/m(g/mm) | TD | 1370(140) | ||
| Thermal Shrinkage (120°C 15min) |
% | MD | 2.5 | JIS Z1712 |
| TD | 0.0 | |||
| Haze | % | - | 2 | JIS Z1712 |
| Light Transmittance | % | - | 92 | JIS K6714 |
| Gloss(60°- 60° ) | % | - | 140 | JIS K8741 |
| Coefficient of Friction(µs/µd) | - | inner side/ inner side |
0.40/0.35 | Toray Method |
| outer side/ outer side |
0.40/0.35 | |||
| Surface Wetting Tension | mN/m | inner side | 30< | JIS Z1712 |
| outer side | 30< | |||
| Volume Resistivity | Ω • cm | - | 6×1018 | JIS C2330 |
| Coefficient of Water Vapor Transmission | g • 0.1mm/m², 24hr |
- | 1.5 | JIS K6782 |
| Coefficient of Oxygen Transmission | cc • 0.1mm/m², 24hr, atm |
- | 400 | JIS Z1707 |
*Atomospheric Condition:25°C65%RH
Free-format/size photo albums, Mold release applications, Cable cover, Hot wire sealing(for textile-use and other packages)
- Attention
- 1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
- 2. Refer to our MSDS (Material Safety Data Sheet) before use.
- 3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
