(1)Flame retardant (UL 94VTM-0 approval)
(2)Free of halogen or phosphorus-based flame retardants
(3)Black color
(4)Same superior performance as biaxially oriented PET film Lumirror* such as mechanical & electrical properties.
40,60,90
All applications requiring film with flame retardancy, such as FPC, FFC, adhesive tapes, electrical insulation, labels
UL746BFRTI Electrical 105(°C) Mechanical 105(°C)@@UL94FVTM-0(#40`90)
| Type | Lumirror*ZV30 | ||||
|---|---|---|---|---|---|
| Grade | #40 | #60 | #90 | ||
| Thickness | µm | 47 | 60 | 93 | |
| Mechanical Properties |
Tensile strength | MPa | 180/170 | ||
| Elongation at Break | % | 140/135 | |||
| Young's Modules | Gpa | 4.5/4.6 | |||
| Tear strength | N/2cm | 300/300 | 340/320 | 490/520 | |
| Thermal Properties |
Thermal Shrinkage (150°C×30minutes) |
% | 1.0/0.0 | 0.8/-0.1 | 0.4/-0.1 |
| Thermal Shrinkage (190°C×20minutes) |
% | 1.8/-0.3 | 1.7/-0.4 | 1.0/-0.3 | |
| Thermal expansion coefficient | °C-1 | 2~10-5 | |||
| Melting Point | °C | 260 | |||
| Moisture Absorption | % | 0.5 | |||
| Density | g/cm3 | 1.4 | |||
| Electrical Properties |
Breakdown Voltage | kV | 8.7 | 9.8 | 12.0 |
| Dielectric ConstantiPgj | - | 3.6 | |||
| Dissipation Factor(1kHz) | % | 0.3 | |||
| Volume Resistivity | Ω·cm | 1015`1016 | |||
| Surface Resistivity | Ω/ | 1014`1015 | |||
| Appearance | Black | ||||
| Light Transmittance | % | 1.8 | 0.6 | 0.1 | |
| Flame Retardancy | UL94 | VTM-0 | |||
*These values are typical data for this product under specific test conditions and are not intended for use as limiting specifications.
*Above values with g/h indicates each physical property of MD(Machine Direction)/TD(Transverse Direction).
<Precaution>
This film contains approximately 1% residual solvent (NMP=N-methyl-2-pyrrolidone).
This film release NMP as follows; approximately 0.003wt% of product weight at 150°C, 0.4wt% of product weight at 200°C. Please maintain adequate ventilation when use.
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
