X53 Lumirror*

Features

X53 is a variant of T60, with anti-static agent blended.

Thickness

100µm

Typical properties

Properties   Unit #100 Measurement method
Thickness MMV µm 100 JIS C2151
Tensile strength MD MPa 219 JIS C2151
TD 215 JIS C2151
Elongation at Break MD % 168 JIS C2151
TD 159 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.0 JIS C2151
TD 0.1 JIS C2151
Haze   % 1.5 JIS K7105
Light Transmittance   % 89 JIS K7105
Surface Resistivity   Ω/฻ 1x1010 JIS C2151

Applications

Graphics

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

X53 Lumirror*

Polyester Film Lumirror*

Features

X53 is a variant of T60, with anti-static agent blended.

Thickness

100µm

Typical properties

Properties   Unit #100 Measurement method
Thickness MMV µm 100 JIS C2151
Tensile strength MD MPa 219 JIS C2151
TD 215 JIS C2151
Elongation at Break MD % 168 JIS C2151
TD 159 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.0 JIS C2151
TD 0.1 JIS C2151
Haze   % 1.5 JIS K7105
Light Transmittance   % 89 JIS K7105
Surface Resistivity   Ω/฻ 1x1010 JIS C2151

Applications

Graphics

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print