X30 Lumirror*

Features

X30 is a pigmented black film.

Thickness

38,50,75,100,125,188,250µm

Typical properties

Properties   Unit #38
(152G)
#50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#188
(750G)
#250
(10M)
Measurement method
Thickness MMV µm 38 50 75 100 125 188 250 JIS C2151
Tensile strength MD MPa 225 225 215 210 205 170 170 JIS C2151
TD 225 225 215 200 190 180 170 JIS C2151
Elongation at Break MD % 140 140 140 140 140 180 190 JIS C2151
TD 130 130 130 130 140 140 140 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.0 1.1 1.0 1.0 1.0 0.9 0.8 JIS C2151
TD 0.4 0.6 0.5 0.5 0.5 0.7 0.6 JIS C2151
Optical Density   - 1.6 2.0 3.0 4.0 5.0 6.3 6.3 JIS K7605

Applications

Adhesive tapes, electrical insulation, and drum heads

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

X30 Lumirror*

Polyester Film Lumirror*

Features

X30 is a pigmented black film.

Thickness

38,50,75,100,125,188,250µm

Typical properties

Properties   Unit #38
(152G)
#50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#188
(750G)
#250
(10M)
Measurement method
Thickness MMV µm 38 50 75 100 125 188 250 JIS C2151
Tensile strength MD MPa 225 225 215 210 205 170 170 JIS C2151
TD 225 225 215 200 190 180 170 JIS C2151
Elongation at Break MD % 140 140 140 140 140 180 190 JIS C2151
TD 130 130 130 130 140 140 140 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.0 1.1 1.0 1.0 1.0 0.9 0.8 JIS C2151
TD 0.4 0.6 0.5 0.5 0.5 0.7 0.6 JIS C2151
Optical Density   - 1.6 2.0 3.0 4.0 5.0 6.3 6.3 JIS K7605

Applications

Adhesive tapes, electrical insulation, and drum heads

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print