U34 Lumirror*

Features

U34 is a transparent film with easy adhesion coating on both sides. With its high transparency, it is suitable for applications requiring optical properties.

Thickness

50,75,100,125,175,188µm

Typical properties

Properties Unit #50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#175
(700G)
#188
(750G)
Measurement method
Thickness   µm 50 75 100 125 175 188 JIS C2151
Tensile strength MD MPa 265 225 220 215 180 205 JIS C2151
TD 275 240 235 225 190 200 JIS C2151
Elongation at Break MD % 165 155 180 180 170 150 JIS C2151
TD 150 140 150 150 135 130 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.5 1.0 1.0 1.0 1.0 1.0 ASTM D1204
TD 0.8 0.6 0.5 0.5 0.5 0.5 ASTM D1204
Haze   % 0.2 0.2 0.2 0.2 0.4 0.4 JIS K7105
Light Transmittance   % 93 93 93 93 93 93 JIS K7105
Color L   96 96 96 96 96 96 JIS K7105
a   -0.2 -0.2 -0.2 -0.2 -0.2 -0.2 JIS K7105
b   -0.2 -0.2 -0.2 -0.2 -0.2 0.1 JIS K7105
Surface wetting tension Both sides mN/m 38 38 38 38 38 38 JIS K6768

Applications

Label, Base film of hard coated film

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

U34 Lumirror*

Polyester Film Lumirror*

Features

U34 is a transparent film with easy adhesion coating on both sides. With its high transparency, it is suitable for applications requiring optical properties.

Thickness

50,75,100,125,175,188µm

Typical properties

Properties Unit #50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#175
(700G)
#188
(750G)
Measurement method
Thickness   µm 50 75 100 125 175 188 JIS C2151
Tensile strength MD MPa 265 225 220 215 180 205 JIS C2151
TD 275 240 235 225 190 200 JIS C2151
Elongation at Break MD % 165 155 180 180 170 150 JIS C2151
TD 150 140 150 150 135 130 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.5 1.0 1.0 1.0 1.0 1.0 ASTM D1204
TD 0.8 0.6 0.5 0.5 0.5 0.5 ASTM D1204
Haze   % 0.2 0.2 0.2 0.2 0.4 0.4 JIS K7105
Light Transmittance   % 93 93 93 93 93 93 JIS K7105
Color L   96 96 96 96 96 96 JIS K7105
a   -0.2 -0.2 -0.2 -0.2 -0.2 -0.2 JIS K7105
b   -0.2 -0.2 -0.2 -0.2 -0.2 0.1 JIS K7105
Surface wetting tension Both sides mN/m 38 38 38 38 38 38 JIS K6768

Applications

Label, Base film of hard coated film

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print