T83 Lumirror*

Features

T83 is a transparent film with one side coated, and providing good adhesion and anti-static properties.

Thickness

16,38,50µm

Typical properties

Properties Unit #16
(64G)
#38
(150G)
#50
(200G)
Measurement method
Thickness MMV µm 16 38 50 JIS C2151
Tensile strength MD MPa 270 260 260 JIS C2151
TD 270 260 270 JIS C2151
Elongation at Break MD % 170 170 190 JIS C2151
TD 150 160 160 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.5 1.4 1.4 JIS C2151
TD 0.3 0.3 0.3 JIS C2151
Haze   % 0.9 1.0 1.1 JIS K7105
Light Transmittance   % 92.3 92.3 92.3 JIS K7105
Coefficient of Friction µs - 0.5 0.5 0.5 ASTM D1894
µd - 0.3 0.3 0.3 ASTM D1894
Surface wetting tension Treated side mN/m >58 >58 >58 JIS K6768
Surface Resistivity Treated side Ω/฻ 5x108 5x108 5x108 JIS C2151(23°C65RH%)

Humidity dependence of surface resistivity

  20°C
  65%RH 40%RH 20%RH
T83 5x108 5x109 5x1014

Result of ink adhesion test

  UV Cure Solvent base Water base@Flexo PVOH
  Offset Screen Flexo Offset Screen    
T83

Applications

Label, carrier tape, etc.

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

T83 Lumirror*

Polyester Film Lumirror*

Features

T83 is a transparent film with one side coated, and providing good adhesion and anti-static properties.

Thickness

16,38,50µm

Typical properties

Properties Unit #16
(64G)
#38
(150G)
#50
(200G)
Measurement method
Thickness MMV µm 16 38 50 JIS C2151
Tensile strength MD MPa 270 260 260 JIS C2151
TD 270 260 270 JIS C2151
Elongation at Break MD % 170 170 190 JIS C2151
TD 150 160 160 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.5 1.4 1.4 JIS C2151
TD 0.3 0.3 0.3 JIS C2151
Haze   % 0.9 1.0 1.1 JIS K7105
Light Transmittance   % 92.3 92.3 92.3 JIS K7105
Coefficient of Friction µs - 0.5 0.5 0.5 ASTM D1894
µd - 0.3 0.3 0.3 ASTM D1894
Surface wetting tension Treated side mN/m >58 >58 >58 JIS K6768
Surface Resistivity Treated side Ω/฻ 5x108 5x108 5x108 JIS C2151(23°C65RH%)

Humidity dependence of surface resistivity

  20°C
  65%RH 40%RH 20%RH
T83 5x108 5x109 5x1014

Result of ink adhesion test

  UV Cure Solvent base Water base@Flexo PVOH
  Offset Screen Flexo Offset Screen    
T83

Applications

Label, carrier tape, etc.

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print