S56 Lumirror*

Features

S56 is a variant of S10, with low thermal shrinkage.

Thickness

125µm

Typical properties

Properties Unit #125
(500G)
Measurement method
Thickness MMV µm 125 JIS C2151
Tensile strength MD MPa 192 JIS C2151
TD 205 JIS C2151
Elongation at Break MD % 175 JIS C2151
TD 162 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 0.5 JIS C2151
TD 0.2 JIS C2151
Breakdown Voltage   kV 19.4 JIS C2151
Volume Resistivity(20°C)   Ω/cm 5x1017 JIS C2151
Dissipation Factor(20°C,1kHz)   % 0.41 JIS C2151

Applications

All applications requiring film with low thermal shrinkage.

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C)
UL94VTM-2(#38 to #188)

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

S56 Lumirror*

Polyester Film Lumirror*

Features

S56 is a variant of S10, with low thermal shrinkage.

Thickness

125µm

Typical properties

Properties Unit #125
(500G)
Measurement method
Thickness MMV µm 125 JIS C2151
Tensile strength MD MPa 192 JIS C2151
TD 205 JIS C2151
Elongation at Break MD % 175 JIS C2151
TD 162 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 0.5 JIS C2151
TD 0.2 JIS C2151
Breakdown Voltage   kV 19.4 JIS C2151
Volume Resistivity(20°C)   Ω/cm 5x1017 JIS C2151
Dissipation Factor(20°C,1kHz)   % 0.41 JIS C2151

Applications

All applications requiring film with low thermal shrinkage.

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C)
UL94VTM-2(#38 to #188)

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print