S10 Lumirror*

Features

S10 is a standard film for various industrial material applications, where excellent handling property is required.

Thickness

12,23,38,50,75,100,125,188,250,342µm

Typical properties

Properties Unit #12
(48G)
#25
(92G)
#38
(152G)
#50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#188
(750G)
#250
(10M)
#350
(14M)
Measurement method
Thickness MMV µm 12 23 38 50 75 100 125 188 250 342 JIS C2151
Tensile strength MD MPa 288 229 224 222 217 219 214 185 179 165 JIS C2151
TD 233 233 240 237 224 225 216 198 183 168 JIS C2151
Elongation at Break MD % 122 169 185 189 167 163 167 184 194 195 JIS C2151
TD 147 161 172 172 153 150 149 133 159 166 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.3 1.2 1.2 1.1 1.2 1.1 1.1 0.9 1.0 0.9 JIS C2151
TD 0.1 0.0 0.3 0.1 0.3 0.1 0.2 0.4 0.6 0.5 JIS C2151
Breakdown Voltage   kV 3.3 7.4 10.1 12.0 14.9 17.2 19.3 24.2 27.9 30.9 JIS C2151
Volume Resistivity(20°C)   Ω/cm 9x1017 6x1017 4x1017 4x1017 5x1017 4x1017 4x1017 4x1017 4x1017 3×1017 JIS C2151
Dissipation Factor(20°C,1kHz)   % 0.37 0.41 0.41 0.42 0.42 0.41 0.42 0.43 0.43 0.40 JIS C2151
Coefficient of Friction µs - 0.6 0.5 0.4 0.6 0.6 0.6 0.6 - - - ASTM D1894
µd - 0.4 0.4 0.4 0.4 0.4 0.4 0.4 - - - ASTM D1894

Applications

S10, with its standard characteristics, can be used in a wide range of industrial material applications, including FPC, membrane switches, adhesive tapes, electrical insulation, and casting release.

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C)
UL94VTM-2(#38 to #188)

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

S10 Lumirror*

Polyester Film Lumirror*

Features

S10 is a standard film for various industrial material applications, where excellent handling property is required.

Thickness

12,23,38,50,75,100,125,188,250,342µm

Typical properties

Properties Unit #12
(48G)
#25
(92G)
#38
(152G)
#50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#188
(750G)
#250
(10M)
#350
(14M)
Measurement method
Thickness MMV µm 12 23 38 50 75 100 125 188 250 342 JIS C2151
Tensile strength MD MPa 288 229 224 222 217 219 214 185 179 165 JIS C2151
TD 233 233 240 237 224 225 216 198 183 168 JIS C2151
Elongation at Break MD % 122 169 185 189 167 163 167 184 194 195 JIS C2151
TD 147 161 172 172 153 150 149 133 159 166 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.3 1.2 1.2 1.1 1.2 1.1 1.1 0.9 1.0 0.9 JIS C2151
TD 0.1 0.0 0.3 0.1 0.3 0.1 0.2 0.4 0.6 0.5 JIS C2151
Breakdown Voltage   kV 3.3 7.4 10.1 12.0 14.9 17.2 19.3 24.2 27.9 30.9 JIS C2151
Volume Resistivity(20°C)   Ω/cm 9x1017 6x1017 4x1017 4x1017 5x1017 4x1017 4x1017 4x1017 4x1017 3×1017 JIS C2151
Dissipation Factor(20°C,1kHz)   % 0.37 0.41 0.41 0.42 0.42 0.41 0.42 0.43 0.43 0.40 JIS C2151
Coefficient of Friction µs - 0.6 0.5 0.4 0.6 0.6 0.6 0.6 - - - ASTM D1894
µd - 0.4 0.4 0.4 0.4 0.4 0.4 0.4 - - - ASTM D1894

Applications

S10, with its standard characteristics, can be used in a wide range of industrial material applications, including FPC, membrane switches, adhesive tapes, electrical insulation, and casting release.

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C)
UL94VTM-2(#38 to #188)

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print