R75 Lumirror*

Features

R75 is a low fish-eye type, with moderate transparency and slip property. It is suitable for applications that require the control of large foreign particles and external appearance.

Thickness

25,38,75µm

Typical properties

Properties Unit #25
(92G)
#38
(150G)
#75
(300G)
Measurement method
Thickness   µm 25 38 75 JIS C2151
Tensile strength MD MPa 292 274 270 JIS C2151
TD 311 297 270 JIS C2151
Elongation at Break MD % 167 137 134 JIS C2151
TD 146 117 124 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.3 1.2 1.0 ASTM D1204
TD 0.2 0.1 0.2 ASTM D1204
Haze   % 3.5 3.2 6.3 JIS K7105
Two dimensional
surface roughness
Ra nm 41 39 40 JIS C2151
FE 50 to 99µ unit/1000cm2 2 2 3 Toray Method
100µ- 0 0 0 Toray Method

Applications

Release film

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

R75 Lumirror*

Polyester Film Lumirror*

Features

R75 is a low fish-eye type, with moderate transparency and slip property. It is suitable for applications that require the control of large foreign particles and external appearance.

Thickness

25,38,75µm

Typical properties

Properties Unit #25
(92G)
#38
(150G)
#75
(300G)
Measurement method
Thickness   µm 25 38 75 JIS C2151
Tensile strength MD MPa 292 274 270 JIS C2151
TD 311 297 270 JIS C2151
Elongation at Break MD % 167 137 134 JIS C2151
TD 146 117 124 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.3 1.2 1.0 ASTM D1204
TD 0.2 0.1 0.2 ASTM D1204
Haze   % 3.5 3.2 6.3 JIS K7105
Two dimensional
surface roughness
Ra nm 41 39 40 JIS C2151
FE 50 to 99µ unit/1000cm2 2 2 3 Toray Method
100µ- 0 0 0 Toray Method

Applications

Release film

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print