H10 Lumirror*

Features

H10 is a hazy type of film, with excellent handling properties and electrical characteristics.

Thickness

50,75,100,125,188,210,250,300,350,480µm

Typical properties

Properties Unit #50
(200G)		 #75
(300G)		 #100
(400G)		 #125
(500G)		 #188
(750G)		 #210
(840G)		 #250
(10M)		 #300
(12M)		 #350
(14M)		 #500
(20M)		 Measurement method
Thickness MMV µm 50 75 100 125 188 210 250 300 350 480 JIS C2151
Tensile strength MD MPa 260 249 239 238 170 192 187 179 175 134 JIS C2151
TD 268 250 238 232 200 199 189 181 175 140 JIS C2151
Elongation at Break MD % 164 165 160 160 188 180 194 196 196 245 JIS C2151
TD 161 154 149 154 144 150 159 167 169 213 JIS C2151
Thermal Shrinkage
(150°C×30min)		 MD % 1.7 1.4 1.3 1.2 1.0 1.1 1.0 1.0 0.9 0.9 JIS C2151
TD 0.5 0.6 0.5 0.2 0.7 0.6 0.5 0.5 0.5 0.4 JIS C2151
Breakdown Voltage   kV 11.2 14.0 16.2 18.1 23.1 24.6 26.8 29.3 31.2 38.4 JIS C2151
Volume Resistivity(20°C)   Ω/cm 2×1017 2×1017 5×1017 5×1017 3×1017 4×1017 3×1017 3×1017 4×1017 4×1017 JIS C2151
Dissipation Factor(20°C,1kHz)   % 0.44 0.43 0.43 0.41 0.44 0.45 0.43 0.43 0.43 0.44 JIS C2151

Applications

Electrical insulation (for motors and transformers)

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C)
UL94VTM-2(#50 to #210)

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

H10 Lumirror*

Polyester Film Lumirror*

Features

H10 is a hazy type of film, with excellent handling properties and electrical characteristics.

Thickness

50,75,100,125,188,210,250,300,350,480µm

Typical properties

Properties Unit #50
(200G)		 #75
(300G)		 #100
(400G)		 #125
(500G)		 #188
(750G)		 #210
(840G)		 #250
(10M)		 #300
(12M)		 #350
(14M)		 #500
(20M)		 Measurement method
Thickness MMV µm 50 75 100 125 188 210 250 300 350 480 JIS C2151
Tensile strength MD MPa 260 249 239 238 170 192 187 179 175 134 JIS C2151
TD 268 250 238 232 200 199 189 181 175 140 JIS C2151
Elongation at Break MD % 164 165 160 160 188 180 194 196 196 245 JIS C2151
TD 161 154 149 154 144 150 159 167 169 213 JIS C2151
Thermal Shrinkage
(150°C×30min)		 MD % 1.7 1.4 1.3 1.2 1.0 1.1 1.0 1.0 0.9 0.9 JIS C2151
TD 0.5 0.6 0.5 0.2 0.7 0.6 0.5 0.5 0.5 0.4 JIS C2151
Breakdown Voltage   kV 11.2 14.0 16.2 18.1 23.1 24.6 26.8 29.3 31.2 38.4 JIS C2151
Volume Resistivity(20°C)   Ω/cm 2×1017 2×1017 5×1017 5×1017 3×1017 4×1017 3×1017 3×1017 4×1017 4×1017 JIS C2151
Dissipation Factor(20°C,1kHz)   % 0.44 0.43 0.43 0.41 0.44 0.45 0.43 0.43 0.43 0.44 JIS C2151

Applications

Electrical insulation (for motors and transformers)

Standards

UL746B:RTI Electrical 105(°C) Mechanical 105(°C)
UL94VTM-2(#50 to #210)

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print