FB50 Lumirror*

Features

FB50 is designed as the base film for DFR with optimum surface smoothness, transparency and handling property.
It may be used for various applications from general patterning of circuits to semiconductor packaging.

Thickness

16µm

Typical properties

Properties Unit #16
(64G)
Measurement method
Thickness MMV µm 16 JIS C2151
Tensile strength MD MPa 280 JIS C2151
TD 345 JIS C2151
Elongation at Break MD % 155 JIS C2151
TD 100 JIS C2151
F-5 value MD MPa 110 ASTM D882
TD 125
Thermal Shrinkage
(150°C×30min)
MD % 2.5 ASTM D2305
TD 1.5
Haze   % 1.6 JIS K7105
Light Transmittance   % 89.8 JIS K7105
Coefficient of Friction µs - 0.8 ASTM D1894

Applications

Base for dry film

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

FB50 Lumirror*

Polyester Film Lumirror*

Features

FB50 is designed as the base film for DFR with optimum surface smoothness, transparency and handling property.
It may be used for various applications from general patterning of circuits to semiconductor packaging.

Thickness

16µm

Typical properties

Properties Unit #16
(64G)
Measurement method
Thickness MMV µm 16 JIS C2151
Tensile strength MD MPa 280 JIS C2151
TD 345 JIS C2151
Elongation at Break MD % 155 JIS C2151
TD 100 JIS C2151
F-5 value MD MPa 110 ASTM D882
TD 125
Thermal Shrinkage
(150°C×30min)
MD % 2.5 ASTM D2305
TD 1.5
Haze   % 1.6 JIS K7105
Light Transmittance   % 89.8 JIS K7105
Coefficient of Friction µs - 0.8 ASTM D1894

Applications

Base for dry film

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print