F99 Lumirror*

Features

F99 is designed to be optimum as the base for transfer printing film.

Thickness

38µm

Typical properties

Properties Unit #38
(150G)
Measurement method
Thickness   µm 38 JIS C2151
Tensile strength MD MPa 260 JIS C2151
TD 260 JIS C2151
Elongation at Break MD % 170 JIS C2151
TD 165 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.4 JIS C2151
TD 0.5 JIS C2151
Haze   % 5.0 JIS K7105
Surface wetting tension Treated side mN/m 50 JIS K6768

Applications

Inmold-stamping

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

F99 Lumirror*

Polyester Film Lumirror*

Features

F99 is designed to be optimum as the base for transfer printing film.

Thickness

38µm

Typical properties

Properties Unit #38
(150G)
Measurement method
Thickness   µm 38 JIS C2151
Tensile strength MD MPa 260 JIS C2151
TD 260 JIS C2151
Elongation at Break MD % 170 JIS C2151
TD 165 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.4 JIS C2151
TD 0.5 JIS C2151
Haze   % 5.0 JIS K7105
Surface wetting tension Treated side mN/m 50 JIS K6768

Applications

Inmold-stamping

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print