F65 Lumirror*

Features

F65 is a film material for stamping foil.

Thickness

12,25µm

Typical properties

Properties Unit #12
(48G)
#25
(100G)
Measurement method
Thickness MMV µm 12 25 JIS C2151
Tensile strength MD MPa 318 262 JIS C2151
TD 255 259 JIS C2151
Elongation at Break MD % 123 159 JIS C2151
TD 146 154 JIS C2151
Thermal Shrinkage
(190°C×20min)
MD % 3.7 3.1 JIS C2151
TD 0.0 0.0 JIS C2151
Haze   % 2.0 3.2 JIS K7105
Coefficient of Friction µs - 0.6 0.5 ASTM D1894
µd 0.5 0.4 ASTM D1894

Applications

Stamping foil

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

F65 Lumirror*

Polyester Film Lumirror*

Features

F65 is a film material for stamping foil.

Thickness

12,25µm

Typical properties

Properties Unit #12
(48G)
#25
(100G)
Measurement method
Thickness MMV µm 12 25 JIS C2151
Tensile strength MD MPa 318 262 JIS C2151
TD 255 259 JIS C2151
Elongation at Break MD % 123 159 JIS C2151
TD 146 154 JIS C2151
Thermal Shrinkage
(190°C×20min)
MD % 3.7 3.1 JIS C2151
TD 0.0 0.0 JIS C2151
Haze   % 2.0 3.2 JIS K7105
Coefficient of Friction µs - 0.6 0.5 ASTM D1894
µd 0.5 0.4 ASTM D1894

Applications

Stamping foil

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print