F53 Lumirror*

Features

F53 is an ultra-thin film, with excellent heat-resistance and handling properties.

Thickness

3.5,4.5,5.7µm

Typical properties

Properties   Unit #4A #5A #6C Measurement method
Thickness MMV µm 3.5 4.5 5.7 JIS C2151
MMV 3.9 5.0 6.2 JIS C2151
Tensile strength MD MPa 336 304 321 JIS C2151
TD 224 239 241 JIS C2151
Elongation at Break MD % 79 98 97 JIS C2151
TD 113 113 120 JIS C2151
F-5 value MD MPa 125 115 117 JIS C2151
TD 102 102 102 JIS C2151
Young's Modules MD GPa 5.5 5.1 5.2 ASTM D882
TD 4.8 5.0 4.9 ASTM D882
Thermal Shrinkage
(150°C×30min)
MD % 2.0 1.7 1.8 JIS C2151
TD 0.8 0.8 0.8 JIS C2151
Coefficient of Friction µs - 0.64 0.56 0.47 ASTM D1894
µd 0.49 0.43 0.40 ASTM D1894

Applications

Thermal transfer ribbon

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

F53 Lumirror*

Polyester Film Lumirror*

Features

F53 is an ultra-thin film, with excellent heat-resistance and handling properties.

Thickness

3.5,4.5,5.7µm

Typical properties

Properties   Unit #4A #5A #6C Measurement method
Thickness MMV µm 3.5 4.5 5.7 JIS C2151
MMV 3.9 5.0 6.2 JIS C2151
Tensile strength MD MPa 336 304 321 JIS C2151
TD 224 239 241 JIS C2151
Elongation at Break MD % 79 98 97 JIS C2151
TD 113 113 120 JIS C2151
F-5 value MD MPa 125 115 117 JIS C2151
TD 102 102 102 JIS C2151
Young's Modules MD GPa 5.5 5.1 5.2 ASTM D882
TD 4.8 5.0 4.9 ASTM D882
Thermal Shrinkage
(150°C×30min)
MD % 2.0 1.7 1.8 JIS C2151
TD 0.8 0.8 0.8 JIS C2151
Coefficient of Friction µs - 0.64 0.56 0.47 ASTM D1894
µd 0.49 0.43 0.40 ASTM D1894

Applications

Thermal transfer ribbon

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print