E6SR Lumirror*

Features

E6SR is a white film with low specific gravity and high reflectivity.

Thickness

188,225µm

Typical properties

Properties Unit #188
(750G)
#225
(900G)
Measurement method
Thickness MMV µm 188 225 JIS C2151
Thermal Shrinkage(90°C×30min) MD % 0.5 0.5 JIS C2151
TD 0.3 0.3
Tensile strength MD MPa 70 70 JIS C2151
TD 65 60
Elongation at Break MD % 80 85 JIS C2151
TD 60 60
Relative Reflectance 560
nm
% 105 106 *1
Specular Gloss 60° % 60 60 JIS K7105

*1: Relative reflectance campared with standard white Al2O3 plate.

Applications

Reflection film for LCD back-lighting

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

E6SR Lumirror*

Polyester Film Lumirror*

Features

E6SR is a white film with low specific gravity and high reflectivity.

Thickness

188,225µm

Typical properties

Properties Unit #188
(750G)
#225
(900G)
Measurement method
Thickness MMV µm 188 225 JIS C2151
Thermal Shrinkage(90°C×30min) MD % 0.5 0.5 JIS C2151
TD 0.3 0.3
Tensile strength MD MPa 70 70 JIS C2151
TD 65 60
Elongation at Break MD % 80 85 JIS C2151
TD 60 60
  (560)
nm
% 150 106 *1
Specular Gloss -60° % 60 60 JIS K7105

*1: Relative reflectance campared with standard white Al2O3 plate.

Applications

Reflection film for LCD back-lighting

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print