E22 Lumirror*

Features

E22 is a variant of E20, with enhanced adhesion and anti-static properties (treated on both sides).

Thickness

188,250µm

Typical properties

Properties   Unit #188
(750G)
#250
(10M)
Measurement method
Thickness MMV µm 189 251 JIS C2151
WMV µm 188 250 JIS C2151
Tensile strength MD MPa 143 142 JIS C2151
TD 144 141 JIS C2151
Elongation at Break MD % 99 100 JIS C2151
TD 77 73 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 0.9 0.9 JIS C2151
TD 0.5 0.4 JIS C2151
Specular Gloss   % 20 20 JIS Z8741
Whiteness Index   % 93.3 93.3 JIS L1015
Optical Density   - 1.63 1.90 JIS K7605
Surface Resistivity   Ω/฻ 3×1010 3×1010 JIS K6911

Applications

Pre-paid cards, graphic arts base

1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

E22 Lumirror*

Polyester Film Lumirror*

Features

E22 is a variant of E20, with enhanced adhesion and anti-static properties (treated on both sides).

Thickness

188,250µm

Typical properties

Properties   Unit #188
(750G)
#250
(10M)
Measurement method
Thickness MMV µm 189 251 JIS C2151
WMV µm 188 250 JIS C2151
Tensile strength MD MPa 143 142 JIS C2151
TD 144 141 JIS C2151
Elongation at Break MD % 99 100 JIS C2151
TD 77 73 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 0.9 0.9 JIS C2151
TD 0.5 0.4 JIS C2151
Specular Gloss   % 20 20 JIS Z8741
Whiteness Index   % 93.3 93.3 JIS L1015
Optical Density   - 1.63 1.90 JIS K7605
Surface Resistivity   Ω/฻ 3×1010 3×1010 JIS K6911

Applications

Pre-paid cards, graphic arts base

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print