E20 Lumirror*

Features

38,50,75,100,125,188,250μm

Thickness

38,50,75,100,125,188,250μm

Typical properties

Properties   Unit #38
(152G)
#50
(200G)
#75
(300G)
#100
(400G)
#125
(500G)
#188
(750G)
#250
(10M)
Measurement method
Thickness MMV µm 41 52 77 102 126 189 251 JIS C2151
WMV µm 38 50 75 100 125 188 250 JIS C2151
Tensile strength MD MPa 186 187 172 177 176 157 157 JIS C2151
TD 196 189 173 177 165 158 157 JIS C2151
Elongation at Break MD % 118 123 110 112 112 121 120 JIS C2151
TD 102 106 102 104 109 98 97 JIS C2151
Thermal Shrinkage
(150°C×30min)
MD % 1.6 1.4 1.3 1.1 1.1 0.8 1.0 JIS C2151
TD 0.3 0.4 0.2 0.1 0.0 0.3 0.4 JIS C2151
Specular Gloss   % 36 37 36 37 35 35 34 JIS Z8741
Whiteness Index   % 91.2 92.1 92.0 92.0 91.9 91.7 91.7 JIS L1015
Optical Density     0.80 0.87 1.00 1.18 1.30 1.59 1.90 JIS K7605
Surface Resistivity   Ω/฻ 1016 1016 1016 1016 1016 1016 1016 JIS K6911

Applications

Cards, labels, and whiteboards

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.
  • Back
  • Print Friendly Page

PAGE TOP

  • Terms of use
  • Privacy Policy
  • Site map

Low fringe pattern Lumirror*

Polyester Film Lumirror*

Features

Please contact us.

Thickness

various

Applications

Hard coating,Touch panels

Attention
1. We accept no responsibility for results obtained by the application of the information indicated and for the safety and suitability of the products, by itself or in combination with other products. Users are advised to perform their own tests to determine the safety and suitability of such product and product combinationaccording to each of its purposes.
2. Refer to our MSDS (Material Safety Data Sheet) before use.
3. The publication is not to be taken as a license to operate under, or as a recommendation to infringe any patents.

Print